ANGLE VALVE INSTALLATION / REPLACEMENT SERVICE

ABOUT SERVICE

Our Angle Valve Installation / Replacement Service is designed to professionally install, replace, or refit angle valves used to control water supply to taps, wash basins, toilets, sinks, and other plumbing fixtures. Our trained technician inspects the existing valve and connection, removes the faulty or damaged valve where required, installs the suitable replacement, and checks the connection for leakage and proper water flow.

SERVICE COVERAGE

• Wash basin angle valve installation
• Toilet angle valve installation
• Sink angle valve installation
• Angle valve replacement
• Leaking angle valve replacement
• Damaged or faulty valve replacement
• Loose angle valve refitting
• Water supply connection checking
• Leakage and water-flow testing

WHAT'S INCLUDED

• Inspection of the existing angle valve
• Removal of the old valve, if required
• Installation of the new angle valve
• Proper fitting and tightening of the connection
• Connection with the existing water supply line
• Basic thread/sealing inspection
• Leakage testing after installation
• Basic water-flow testing

WHAT'S NOT INCLUDED

• Cost of the new angle valve or spare parts
• Main water pipeline replacement
• Concealed pipeline repair
• Wall or floor breaking
• Major plumbing modification
• Civil or masonry work
• Water tank or pump repair
• Replacement of connected taps or sanitary fixtures
• Any additional work outside the defined service scope

ESTIMATED SERVICE DURATION

Standard angle valve installation or replacement generally takes 30–60 minutes. Actual service duration may vary depending on accessibility, the condition of the existing connection, and any additional plumbing work required.

BEFORE SERVICE

• Keep the area around the valve accessible.
• Remove items blocking access to the plumbing connection.
• Inform the technician about any existing leakage or water-supply issue.
• If possible, keep the replacement angle valve available if it is not included in the service.

AFTER SERVICE

• Check the angle valve and connection for leakage.
• Turn on the water supply and confirm proper water flow.
• Ensure the valve opens and closes smoothly.
• Avoid applying excessive force to the newly installed valve.
• Contact Shandar Services if any service-related leakage or issue is noticed after installation.

WHY CHOOSE SHANDAR SERVICES

• Trained and experienced technicians
• Professional valve installation and replacement
• Proper fitting and alignment
• Leakage and water-flow testing
• Transparent service process
• Quality-focused workmanship
• Convenient doorstep service
• Customer-friendly support

TERMS & CONDITIONS

• Service charges cover only the specified installation or replacement work.
• Spare parts and replacement materials are charged separately unless specifically included.
• Final charges may vary if additional plumbing work is required after inspection.
• Concealed pipeline issues are outside the standard service scope.
• Civil, masonry, wall-breaking, and floor-breaking work are not included.
• The customer must provide safe and reasonable access to the work area.
• Additional work will be carried out only after customer approval.
• Service availability may vary by location and technician availability.
• Any applicable service warranty will be subject to the terms communicated at the time of booking.

FAQS

Q1. What is an angle valve?
An angle valve is a small water-control valve commonly installed near plumbing fixtures to control the water supply to taps, toilets, sinks, and wash basins.

Q2. When should an angle valve be replaced?
An angle valve may need replacement if it is leaking, damaged, corroded, stuck, or not controlling the water supply properly.

Q3. Can you install a new angle valve?
Yes. Our technician can install a suitable angle valve using the existing accessible water-supply connection.

Q4. Does the service include the angle valve?
The replacement angle valve is generally not included unless specifically mentioned in the booking. Spare-part costs may be charged separately.

Q5. Can a leaking angle valve be repaired?
Minor connection issues may sometimes be corrected by tightening or refitting. If the valve itself is damaged or faulty, replacement is recommended.

Q6. How long does angle valve replacement take?
A standard installation or replacement generally takes around 30–60 minutes, depending on accessibility and the condition of the existing connection.

Q7. Will the technician check for leakage after installation?
Yes. The technician performs a basic leakage and water-flow check after completing the installation or replacement.