WASH BASIN LEAKAGE REPAIR SERVICE

ABOUT SERVICE

Our Wash Basin Leakage Repair Service is designed to identify and repair common visible leakage issues around wash basins, taps, waste outlets, bottle traps, and accessible plumbing connections. Our trained technician inspects the affected area, identifies the likely source of leakage, and carries out suitable repair or refitting work to restore a secure and leak-free connection.

SERVICE COVERAGE

• Wash basin leakage inspection
• Tap connection leakage repair
• Waste outlet leakage repair
• Bottle trap leakage repair
• Drain pipe connection leakage repair
• Loose plumbing connection refitting
• Seal and washer replacement
• Accessible pipe joint leakage repair
• Basic water-flow and leakage testing

WHAT'S INCLUDED

• Inspection of the wash basin and accessible connections
• Identification of the visible leakage source
• Refitting or tightening of loose connections
• Replacement of basic sealing components, where applicable
• Proper alignment of accessible plumbing fittings
• Basic leakage testing
• Basic water-flow testing
• Cleaning of the immediate work area

WHAT'S NOT INCLUDED

• Cost of spare parts and replacement materials
• Wash basin replacement
• Tap or mixer replacement
• Concealed pipe leakage repair
• Wall or floor breaking
• Tile removal or replacement
• Civil or masonry work
• Waterproofing work
• Major drainage pipe replacement
• Any additional work outside the defined service scope

ESTIMATED SERVICE DURATION

Standard wash basin leakage repair generally takes 30–90 minutes. Actual service duration may vary depending on the leakage source, accessibility, condition of the fittings, and additional repair requirements.

BEFORE SERVICE

• Keep the wash basin area accessible.
• Remove personal items stored around or below the basin.
• Inform the technician about the exact area where leakage is noticed.
• Avoid excessive use of the basin if there is significant leakage.

AFTER SERVICE

• Check all repaired connections for leakage.
• Run water through the basin to confirm proper drainage.
• Keep the area around the repaired connection dry and clean.
• Avoid applying excessive force to newly tightened fittings.
• Contact Shandar Services if leakage continues after the repair.

WHY CHOOSE SHANDAR SERVICES

• Trained and experienced technicians
• Professional leakage inspection
• Proper plumbing connection repair
• Quality sealing and fitting
• Leakage and water-flow testing
• Transparent service process
• Quality-focused workmanship
• Convenient doorstep service

TERMS & CONDITIONS

• Service charges cover only the specified leakage repair work.
• Spare parts and replacement materials are charged separately unless specifically included.
• Final charges may vary if additional plumbing work is required after inspection.
• Concealed leakage and major pipeline issues are outside the standard service scope.
• Wall, floor, tile, civil, masonry, and waterproofing work are not included.
• The customer must provide safe and reasonable access to the work area.
• Additional work will be carried out only after customer approval.
• Service availability may vary by location and technician availability.
• Any applicable service warranty will be subject to the terms communicated at the time of booking.

FAQS

Q1. What can cause wash basin leakage?
Wash basin leakage can be caused by loose connections, damaged seals, worn washers, faulty waste outlets, bottle traps, or leaking pipe joints.

Q2. Can you repair leakage from the wash basin waste outlet?
Yes. Accessible waste outlet leakage can be inspected and repaired by refitting the connection or replacing the required sealing components.

Q3. Can you repair bottle trap leakage under the basin?
Yes. Accessible bottle trap connections can be inspected, refitted, tightened, or repaired as required.

Q4. Does the service include spare parts?
Spare parts and replacement materials are generally charged separately unless specifically mentioned in the booking.

Q5. Can you repair concealed pipe leakage?
Concealed pipe leakage is outside the standard service scope and may require a separate inspection and repair service.

Q6. How long does wash basin leakage repair take?
A standard repair generally takes around 30–90 minutes, depending on the leakage source and accessibility.

Q7. Will the technician test the basin after repair?
Yes. The technician performs a basic water-flow and leakage check after completing the repair.